Wood office desk – If you want a new look for your boring old wooden desk; you can paint it to spice it up. You may want to use a shiny surface to make your desk look like the surface of a grand piano, or bet on something more subdued. Most of the work in painting a wood office desk lies in the preparations for painting. Remove hardware from your wood office desk with a screwdriver. Put hardware pieces inside the small envelopes and label envelopes so you can keep track of them and know where to put them back when you finish painting the table. Cover the floor with old newspaper paper or paint canvas. Remove all parts of the removable disk, such as boxes. Set them nearby so you can prepare them when you finish the main part of the desktop.
Wear protective equipment; start preparing wood office desk for painting. Sand the desktop, starting in the upper right corner. Use a simple and back stroke, and always go in the same direction. Brush off sawdust from time to time. Continue down to the legs and back and front if necessary. When the body is ground, sand any boxes or other parts you removed. Make sure the wood surface feels smooth. If the table has had a lot of use it may need more than a grinding. Use a dry cloth or vacuum cleaner to remove sawdust. Brush a thin layer of white primer on the desktop. Follow the instructions on the jar and allow primer to dry for about two to four hours, or as directed.
Ideas for paint a wood office desk wash the primer from your brush. If you used water-based primer, just rinse your brush under running water. If you used oil based primer, use turpentine to remove primer from the brush. Use the brush, apply a layer of paint, and go towards the wood fibers on the desk. Paint the entire surface of the desktop. Apply additional layers of paint if necessary. Paint the drawers in the desk, as well. Allow the paint to dry overnight. Replace desktop hardware using the screwdriver.